|
|||
|
|
|
|
_50x50.png)
| General | Specification | |||
|---|---|---|---|---|
| Interface/gender | 4.1-9.5 Mini DIN right angle | |||
| Cables supported1 | RFS | LCF12 | LS/Superior Essex | HFC 12D |
| NK Draka | RFA1200 | HFAC 12D | ||
| CommScope | LDF4 | Hansen | RF5012 | |
| LDF4RK | RF5012Z | |||
| LDF4 RN | Leoni Flexline | 1/2"R | ||
| Eupen | EC4 | Rosenberger | SL 1/2" R | |
| Weight | 148 g | .326 lb | |||
| JMA Weather Protection System | WPS-NRA-4A | |||
| Tools required | JMA part number | Comment |
|---|---|---|
| Cable preparation | SP-1/2-LDF4D | "U" bit |
| Connector compression | HCG-FRAMESET-1/2, HCG-CC | Insert A |
| Torque wrench | TQ-78-F8 | 10.8 N·m | 8 lbf·ft |
| Frequency band | VSWR | Return loss (dB) |
|---|---|---|
| 555–1000 MHz | 1.02 | 40 |
| 1000–2700 MHz | 1.03 | 36 |
| 2700–3800 MHz | 1.07 | 32 |
| 3800–6000 MHz | 1.15 | 28 |
| Electrical | Specification | Comment |
|---|---|---|
| Connector impedance | 50 ohm | |
| Operating frequency band | DC–6 GHz | |
| 3rd order IMD dynamic, (PIM) | -161 dBc, typical | IEC 62037-2 |
| DC test voltage | 2500 V | |
| Center contact resistance | ≤1.00 milliohm | |
| Outer contact continuity | 1.00 milliohm max. | |
| Average power | 600 W @ 900 MHz | |
| Peak power, max. | 15 kW | |
| Insertion loss, typical | 0.05 dB | Per connector |
| Shielding effectiveness | < -120 dB | @ 0-1 GHz |
| Mechanical | Specification | Comment |
|---|---|---|
| Pull force combined | 1.1 kN | >250 lb | Cable limited |
| Cable retention torque | 6.7 N·m | 5 lbf·ft | Cable limited |
| Interface durability | 500 cycles | IEC 61169-4:9.5 |
| Environmental | Specification | Test |
|---|---|---|
| Operating temperature | -55 °C to +85 °C (-67 °F to 185 °F) | |
| Storage temperature | -55 °C to +85 °C (-67 °F to 185 °F) | |
| Accelerated UV | 1000 hr | ASTM G154 |
| Immersion test method | Mated & unmated, IP68 | IEC 60529:2001 & ANSI/SCTE 60 |
| Water jetting test method | Mated & unmated, IP66 | IEC 60529:2001 |
| Mechanical shock test method | Pass | IEC 60068-2-27 |
| Thermal shock test method | Pass | IEC 60068-2-14 |
| Vibration test method | 100 m/s2, 2 Hz to 200 Hz | IEC 61169-1:2003 |
| Corrosion test method | 750 hr | IEC 60068-2-11 |
| 1For cable types not listed, please contact JMA Technical Support. |
| ©2024 JMA Wireless. All rights reserved. This document contains proprietary information. All products, company names, brands, and logos are trademarks™ or registered® trademarks of their respective holders. All specifications are subject to change without notice. +1 315.431.7100 customerservice@jmawireless.com |
|