|
|
8-port 1 ft 28° panel antenna 617-960, 1695-2690, 3400-4200, 5150-5925 MHz: 2 ports 617-2690 MHz, 4 ports 3400-4200 MHz, and 2 ports 5150-5925 MHz |
|
---|---|
|
|
Electrical specification (min/max) |
|
||||||||
---|---|---|---|---|---|---|---|---|---|
Frequency bands, MHz | 617-798 | 824-894 | 897-960 | 1695-1880 | 1850-1990 | 1920-2180 | 2300-2400 | 2496-2690 | |
Polarization | ± 45° | ± 45° | |||||||
Average gain, dBi | 11.1 | 10.7 | 10.3 | 10.7 | 11.0 | 12.0 | 12.1 | 12.2 | |
Horizontal beamwidth (HBW), degrees1 | 36.0° | 28.7° | 26.9° | 33.0° | 31.0° | 28.0° | 25.0° | 23.0° | |
Vertical beamwidth (VBW), degrees1 | 62.1° | 61.0° | 59.5° | 52.5° | 54.0° | 55.1° | 47.0° | 42.5° | |
Fixed electrical downtilt (EDT), degrees | 0° | ||||||||
Cross-polar isolation, port-to-port, dB1 | 25 | 25 | |||||||
Max VSWR / return loss, dB | 1.5:1 / -14.0 | 1.5:1 / -14.0 | |||||||
Max PIM (3rd order, 2x20W) dBc | -153 | -153 | |||||||
Maximum input power port, watts | 250 | 150 |
Electrical specification (min/max) |
|
|||
---|---|---|---|---|
Frequency bands, MHz | 3400-4200 | 5150-5925 | ||
Polarization | ± 45° | ± 45° | ||
Average gain, dBi | 13.4 | 5.4 | ||
Horizontal beamwidth (HBW), degrees1 | 30.3° | 65.0° | ||
Vertical beamwidth (VBW), degrees1 | 45.0° | 27.5° | ||
Fixed electrical downtilt (EDT), degrees | 0° | |||
Cross-polar isolation, port-to-port, dB1 | 25 | 25 | ||
Max VSWR / return loss, dB | 1.5:1 / -14.0 | 1.5:1 / -14.0 | ||
Max PIM (3rd order, 2x20W) dBc | N/A | |||
Maximum input power, watts | 50 | 10 |
1 Typical value over frequency. | Note: Vertical beam upper side lobe at 5150-5250 MHz < -12 dB at > 30° above horizon |
Mechanical specifications | |
---|---|
Dimensions height/width/depth, inches (mm) |
24.25/ 14.6/ 7.9 (616/ 371/ 201) |
No. of RF input ports, connector type, and location | 8 x 4.3-10 female, back |
RF connector torque | 96 lbf·in (10.85 N·m or 8 lbf·ft) |
Net antenna weight, lb (kg) | 14.2 (6.5) |
Weight with supplied bracket, lb (kg) | 19.4 (8.8) |
Shipping weight, lbs. (kg) | 28.4 (13) |
Supplied bracket kit | 91900324 (included) |
Mechanical down-tilt range | +/- 25° lateral (azimuth adjustment) and +/- 50° vertical (up/down tilt) |
Rated wind survival speed, mph (km/h) | 120 (193) with 91900324 bracket kit |
Frontal wind loading @ 150 km/h, lbf (N) | 16.25 (72.29) |
Equivalent flat plate @ 100 mph and Cd=2, sq ft | 0.33 |
Installation instructions | DX-*/SX-*/IX-* Antenna Mounting Instructions and Kits 81900511 |
Weep hole drilling instructions | DX-*/SX-*/IX-* Antenna Weep Hole Modification Guide |
Front view | Back view | Side view |
---|---|---|
Connector view | ||
|
Array topology | Notes | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Refer to JMA weep hole modification guide at jmawireless.com for mandatory drilling instructions. The SX antennas can be painted in accordance with the JMA painting guidelines at jmawireless.com |
Ordering information | |
---|---|
Antenna model | Description |
SX08FRO128-01 | 1F X-Pol 8-port panel 28°, 4.3-10 |
919055 | Optional inverted mounting kit for 4.0-10.0 in. OD pole |
91900313 | Optional bracket kit for extended horizontal and vertical tilt ranges |
V5.0
©2024 JMA Wireless. All rights reserved. This document contains proprietary information. All products, company names, brands, and logos are trademarks™ or registered® trademarks of their respective holders. All specifications are subject to change without notice. +1 315.431.7100 customerservice@jmawireless.com |