MX08FIT665-02E

 

NWAV™ X-Pol 8-Port Antenna
Download this datasheet

X-Pol 8-Port 6 ft, 65° Form In Tighter, with Smart Bias Ts, 698-4200 MHz:

4 ports 698-894 MHz and 4 ports 3400-4200 MHz

  • High efficiency macro panel antenna with optimized 4T4R MIMO performance for low and high band.

  • Enhanced pattern performance with superior cross-pol performance and front-to-back ratio

  • Fully integrated (iRETs) with independent RET control for low band and high band

  • Optimized CBRS radiation patterns for improved RSRP and maximum EIRP

  • Excellent passive intermodulation (PIM) performance reduces harmful interference.

  • Suitable for 4G and 5G interface technologies

  • Integrated Smart Bias-Ts reduce leasing costs

  • Optimized form factor for reduced wind loading

Electrical specification (minimum/maximum) Ports 1, 2, 3, 4
Frequency bands, MHz 698-806 806-894
Polarization ± 45°
Maximum gain over all tilts, dBi 14.9 15.1
Average gain over all tilts, dBi 14.7 ± 0.2 14.9 ± 0.2
Horizontal beamwidth (HBW), degrees1 66 64
Front-to-back ratio, co-polar power @180°± 30°, dB >28.0 >28.0
SPR (Sector Power Ratio), % 5 4.5
X-Pol discrimination (CPR) at boresight, dB >20 >20
Vertical beamwidth (VBW), degrees1 11.5 10.5
Electrical downtilt (EDT) range, degrees   0-12
First upper side lobe (USLS) suppression, dB1 ≤-18.0 ≤-16.0
Cross-polar isolation, port-to-port, dB1 25 25
Max VSWR / return loss, dB 1.5:1 / -14.0
Max passive intermodulation (PIM), 2x20W carrier, dBc -153
Max input power per any port, watts 300
Total composite power all ports, watts 1500

1 Typical value over frequency and tilt

Electrical specification (minimum/maximum)   Ports 5, 6, 7, 8
Frequency bands, MHz 3400-3550 3550-3980 3980-4200
Polarization   ± 45°
Maximum gain over all tilts, dBi 13.9 14.2 14.5
Average gain over all tilts, dBi 13.6 ± 0.3 13.8 ± 0.4 14.2 ± 0.3
Horizontal beamwidth (HBW), degrees 65 62 60
Front-to-back ratio, co-polar power @180°± 30°, dB >25 >25 >25
Vertical beamwidth (VBW), degrees1 20.0 19.6 18.0
Electrical downtilt (EDT) range, degrees 2-12
First upper side lobe (USLS) suppression, dB1 ≤-15 ≤-15 ≤-15
Cross-polar isolation, port-to-port, dB1 25 25 25
Max VSWR / return loss, dB   1.5:1 / -14.0
Max passive intermodulation (PIM), 2x20W carrier, dBc -145
Max input power per any port, watts 150
Ordering information
Antenna model Description
MX08FIT665-02E 6F X- Pol 8 PORT FIT 65⁰ 0-12⁰/2-12⁰, 4.3-10 & SBT
Optional accessories
AISG cables M/F cables for AISG connections
PCU-1000 RET controller Stand-alone controller for RET control and configurations
91900314-02 Dual Mount Bracket (see 91900314 bracket document for details)
Mechanical specifications
Dimensions height/width/depth, inches (mm) 72.0/ 20.0/ 8.0 (1828.8/ 508.0/ 203.2)
Shipping dimensions length/width/height, inches (mm) 77.3/ 23.8/ 14.5 (1963.42/ 605/ 368)
No. of RF input ports, connector type, and location 8 x 4.3-10 female, bottom
RF connector torque 96 lbf·in (10.85 N·m or 8 lbf·ft)
Net antenna weight, lb (kg) 39 (17.7)
Shipping weight, lb (kg) 79 (35.8)
Antenna mounting and downtilt kit included with antenna 91900318
Net weight of the mounting and downtilt kit, lb (kg) 18 (8.2)
Range of mechanical up/down tilt -2° to 12°
Rated wind survival speed, mph (km/h) 150 (241)
Frontal and lateral wind loading @ 150 km/h, lbf (N) 129.2 (574.7), 59.8 (266.0)
EPA frontal, ft2, (m2) 5.8 (0.54)
Front view Back view Bottom view
Remote electrical tilt (RET 1000) information
RET location Integrated into antenna
RET interface connector type 8-pin AISG connector per IEC 60130-9 or RF port bias-t
RET connector torque Min 0.5 N·m to max 1.0 N·m (hand pressure & finger tight)
RET interface connector quantity 1 pair of AISG male/female connectors and 1 RF port Bias T
RET interface connector location Bottom of the antenna
Total no. of internal RETs 698-894 MHz 1
Total no. of internal RETs 3400-4200 MHz 1
RET input operating voltage, vdc 10-30
RET max power consumption, idle state, W ≤ 2.0
RET max power consumption, normal operating conditions, W ≤ 13.0
RET communication protocol AISG 2.0 / 3GPP
  RET and RF connector topology
 Each RET device can be controlled either via the designated external AISG connector or RF smart bias-t port as shown below: 
Band RF port
3400-4200 5-8
Band RF port
698-894 1-4
Array topology

4 sets of radiating arrays

R1: 698-894 MHz

R2: 698-894 MHz

P1: 3400-4200 MHz

P2: 3400-4200 MHz
Band RF port
698-894 1-4
3400-4200 5-8

V1.0

08/15/24