CX20OMI536-1C   NWAV™ Cylinder Antenna

Download this datasheet

20-port cylinder antenna 698-3980 MHz: 4 ports 698-894, 8 ports 1695-2690 MHz, and 8 ports 3400-3980 MHz
Macro Cell Omni antenna Supports deployments with 4x4 MIMO capability with all bands Excellent cross-polar discrimination and upper side lobe suppression for enhanced MIMO performance Higher gain for midband and low band for better coverage and in-building penetration Superior omnidirectionality gain consistently across 4x4 MIMO Supports midband 4T8R for improved uplink performance

	Low band		Mid band				3.5 GHz
Frequency bands, MHz	698-894		1695-2690				3400-3980
Array	R1	R2	Y1	Y2	Y3	Y4	P1	P2	P3	P4
Connector	4 PORTS		8 PORTS				8 PORTS
Polarization	XPOL		XPOL				XPOL
Horizontal beamwidth (HBW), degrees1	360		360				360
Electrical downtilt (EDT), degrees1	10		4				4
Configuration	Quasi omni antenna
Connector type	(20x) 4.3-10 female
Dimensions, in. (mm)	61.5/ 14.6 (1562.1/ 370.8)
Maximum composite power, watts (all ports)	1000

Radome color	Gray (Pantone 420C)

1 Typical value over frequency and tilt.

Electrical specifications Low Band R1 R2
Frequency range, MHz	698-894
Polarization	(2x) ± 45°
Gain, BASTA, dBi	9.1 ± 0.4
Gain, MAX, dBi	9.5
Cross-polar discrimination over 360°1	>15
First upper side lobe (USLS) suppression, dB1	>15
Horizontal beamwidth (HBW), 3 dB, degrees1	360
Vertical beamwidth (VBW), 3dB, degrees1	23
Electrical downtilt (EDT), degrees	10
Impedance, ohms	50
VSWR	≤ 1.5:1
PIM, 2x20W carrier, dBc	< -153
Isolation, intra-band, dB	>25
Isolation, inter-band, dB	>28
Input power per port, watts	150

Electrical specifications Mid Band Y1 Y2 Y3 Y4
Frequency range, MHz	1695-2690
Frequency sub-range, MHz	1695-1880	1850-1990	1920-2200	2300-2690
Polarization	(4x) ± 45°
Gain, BASTA, dBi	10.9 ± 0.3	11.2 ± 0.4	11.5 ± 0.3	11.7 ± 0.3
Gain, MAX, dBi	11.4	11.6	11.8	12.0
Cross-polar discrimination over 360°1	>16	>15	>15	>15
First upper side lobe (USLS) suppression, dB1	>15	>15	>15	>15
Horizontal beamwidth (HBW), 3 dB, degrees1	360	360	360	360
Vertical beamwidth (VBW), 3dB, degrees1	11.0	10.7	10.0	9.5
Electrical downtilt (EDT), degrees	4
Impedance, ohms	50
VSWR	≤ 1.5:1
PIM, 2x20W carrier, dBc	< -153
Isolation, intra-band, dB	>25
Isolation, inter-band, dB	>28
Input power per port, watts	125

Electrical specification 3400-3980 MHz P1 P2 P3 P4
Frequency range, MHz	3400-3550	3550-3700	3700-3980
Polarization	(4x) ± 45°
Gain, BASTA, dBi	10.6 ± 0.3	11.1 ± 0.5	11.5 ± 0.5
Gain, MAX, dBi	10.9	11.6	11.8
Cross-polar discrimination over 360°1	>15
First upper side lobe (USLS) suppression, dB1	>15
Horizontal beamwidth (HBW), 3 dB, degrees1	360
Vertical beamwidth (VBW), 3dB, degrees1	9.7 ± 0.3	9.2 ± 0.4	9.0 ± 0.3
Electrical downtilt (EDT), degrees	4
Impedance, ohms	50
VSWR	≤ 1.5:1
PIM, 2x20W carrier, dBc	<-145
Isolation, intra-band, dB	>25
Isolation, inter-band, dB	>28
Input power per port, watts	100

Mechanical specifications
Dimensions height/diameter, inches (mm)	61.5/ 14.6 (1562.1/ 370.8)
Antenna volume (cubic feet)	6
No. of RF input ports, connector type, and location	20 x 4.3-10 RF, bottom
RF connector torque	96 lbf·in (10.85 N·m or 8 lbf·ft)
Net antenna weight, lb (kg)	56 (25.4)
Rated wind survival speed, mph (km/h)	150 (241)
Frontal wind loading @ 160 km/h, lbf (N)	135.4 (602.3)
Equivalent flat plate @ 100 mph and Cd=2, sq ft	2.73

Array topology
10 sets of radiating arrays R1: 698-960 MHz R2: 698-960 MHz Y1: 1695-2690 MHz Y2: 1695-2690 MHz Y3: 1695-2690 MHz Y4: 1695-2690 MHz P1: 3400-3980 MHz P2: 3400-3980 MHz P3: 3400-3980 MHz P4: 3400-3980 MHz	Band RF port 698-960 1-2 698-960 3-4 1695-2690 5-6 1695-2690 7-8 1695-2690 9-10 1695-2690 11-12 3400-3980 13-14 3400-3980 15-16 3400-3980 17-18 3400-3980 19-20

Front view	End view
	The 0 degree reference arrow corresponds to the 0 degree position in the antenna pattern file. Each antenna pattern file uses a top down orientation view (the patterns are viewed from the top of the antenna looking down).
	End view details: 6 stud bolts for direct mount to the Universal Sleeve (SC-BKT-SLA)

Notes on mounting brackets	Example bracket configuration
The antenna comes with the bottom mount studs (marked as 1 ) factory-installed. JMA cylinder brackets are compatible with bottom mount via universal cantenna mount sleeve (marked as 2 ) (SC-BKT-SLA), sold separately with JMA cylinder mounting systems. To mitigate potential risk of PIM issues, the recommended torque values need to be applied.

Ordering information
Antenna model	Description
CX20OMI536-1C	5ft 20 Port OMNI antenna 4LB 8MB 8 3.5GHz

Small Cell solutions and mounting systems (sold separately)
Side Arm Mounting System	SC-BKT-SA-(color)	Wide Diameter Pole	SC-BKT-WTPE-(color)
Steel Pole Mounting System	SC-BKT-SLA (color)

V2.0

10/10/24