CX20OMI236-1Cxy   NWAV™ Cylinder Antenna

Download this datasheet

20-port cylinder antenna 1695-3980 MHz: 8 ports 1695-2690 MHz, 4 ports 3400-3700 MHz, and 8 ports 3700-3980 MHz
Small Cell multi-port cylinder antenna for increased coverage & capacity applications 4x4 MIMO-capable 1695-2690 & 3400-3700 MHz, 8x8 beamforming-capable for 3700-3980 MHz Increased 3.5 GHz gain for improved coverage Symmetrical pattern performance across all 1695-2690 MHz ports Excellent cross-polar discrimination for MIMO performance

Electrical specification (min/max)	Ports 1, 2, 3, 4, 5, 6, 7, 8
Frequency bands, MHz	1695-1880	1850-1990	1920-2280	2300-2690
Polarization	± 45°
Gain, dBi (max)	6.9	7.2	7.4	8.2
Gain, dBi (average)	6.4±0.5	6.7±0.5	6.8±0.6	7.6±0.6
Horizontal beamwidth (HBW), degrees1	360°
Vertical beamwidth (VBW), degrees1	31.0°	29.0°	27.1°	22.8°
Cross-polar discrimination over 360°1	16.0	17.0	16.5	17.5
Electrical downtilt (EDT), degrees	2° or 6° or 10°
Cross-polar isolation, dB1	25
Max VSWR / return loss, dB	1.5:1 / -14.0
Max PIM, 3rd order 2x20W carrier, dBc	-153
Maximum input power port, watts	125

Electrical specification (min/max)	Ports 9, 10, 11, 12
Frequency bands, MHz	3400-3700
Polarization	± 45°
Gain, dBi (max)	7.6
Gain, dBi (average)	7.2±0.4
Horizontal beamwidth (HBW), degrees1	360°
Vertical beamwidth (VBW), degrees1	33°
Cross-polar discrimination over 360°1	15.6
Electrical downtilt (EDT), degrees	0°
Cross-polar isolation, dB1	28
Max VSWR / return loss, dB	1.5:1 / -14.0
Maximum input power port, watts	100
Maximum composite power, watts (all ports)	1000

1 Typical value over frequency and tilt.

Electrical specification, single column (non-beamforming) (minimum/maximum)	Ports 13, 14, 15, 16, 17, 18, 19, 20
Frequency bands, MHz	3700-3980
Gain, dBi	9.7
Vertical beamwidth (VBW), degrees1	9.4
Vertical beamwidth tolerance, degrees	±0.5
Tilt, degrees	2
First upper side lobe (USLS) suppression, dB1	15
Coupling level, Amp, Antenna port to Cal port, dB	26
Coupling level, max Amp Δ, Antenna port to Cal port, dB	±0.6
Coupler, max Amp Δ, Antenna port to Cal port, dB	0.65
Coupler, max Phase Δ, Antenna port to Cal port, degrees	4
Cross-polar isolation, port-to-port, dB1	25
Max VSWR / return loss, dB	1.5:1 / -14.0
Max passive intermodulation (PIM), 2x20W carrier, dBc	-145
Max input power per port at 50 °C, watts	75

Electrical specification, Broadcast 65°	Ports 13, 14, 15, 16, 17, 18, 19, 20
Frequency bands, MHz	3700-3980
Gain over all tilts, dBi	14.4
Horizontal beamwidth (HBW), degrees per sector1	80
Vertical beamwidth (VBW), degrees1	9.4
Vertical beamwidth tolerance, degrees	±0.5
First upper side lobe (USLS) suppression, dB1	<-15

Electrical specification, Service Beam	Ports 13, 14, 15, 16, 17, 18, 19, 20
Frequency bands, MHz	3700-3980
Steered 0° gain, dBi	14.4
Steered 0° Gain tolerance, dBi	±0.6
Steered 0° Beamwidth, Horizontal, degrees	22
Steered 0° CPR at beampeak, dB	18
Steered 0° Horizontal Sidelobe, dB	14
Steered 30° Gain, dBi (max)	13.6
Steered 30° Gain tolerance, dBi	±0.6
Steered 30° Beamwidth, Horizontal, degree	26
Steered 30° CPR at beampeak, dB	18
Steered 30° Horizontal Sidelobe, dB	10

Mechanical specifications
Dimensions height/diameter, inches (mm)	29.799/ 14.60 (756.89/ 370.84)
Antenna volume (cubic feet)	2.91
No. of RF input ports, connector type, and location	20 x 4.3-10 female, bottom
Calibration interface port, connector type, and location	1 x 4.3-10 female, bottom
RF connector torque	96 lbf·in (10.85 N·m or 8 lbf·ft)
Net antenna weight, lb (kg)	30 (13.6)
Rated wind survival speed, mph (km/h)	150 (241)
Frontal wind loading @ 160 km/h, lbf (N)	47.6 (211)

Front view	End view
	The 0 degree reference arrow corresponds to the 0 degree position in the antenna pattern file. Each antenna pattern file uses a top down orientation view (the patterns are viewed from the top of the antenna looking down).
	End view details: 6 stud bolts for direct mount to the Universal Sleeve (SC-BKT-SLA)

Ordering information
Antenna model	Description
CX20OMI236-1Cxy (xy represents the fixed down tilt value per 4 ports for 1695-2690 MHz)	2ft 20 Port OMNI antenna 8MB 4CBRS 8LS6
	xy= 2, 6, or 10 deg per 4 ports 1695-2690 MHz x= FET value for ports 1, 2, 5, 6 (Y1 & Y3) y= FET value for ports 3, 4, 7, 8 (Y2 & Y4)

Notes on mounting brackets	Example bracket configuration
The antenna comes with the bottom mount studs (marked as 1 ) factory-installed. JMA cylinder brackets are compatible with bottom mount via universal cantenna mount sleeve (marked as 2 ) (SC-BKT-SLA), sold separately with JMA cylinder mounting systems. To mitigate potential risk of PIM issues, the recommended torque values need to be applied.

Small Cell solutions and mounting systems (sold separately)
Side Arm Mounting System	SC-BKT-SA-(color)	Wide Diameter Pole	SC-BKT-WTPE-(color)
Steel Pole Mounting System	SC-BKT-SLA (color)

Array topology
10 sets of radiating arrays Y1: 1695-2690 MHz Y2: 1695-2690 MHz Y3: 1695-2690 MHz Y4: 1695-2690 MHz P1: 3400-3700 MHz P2: 3400-3700 MHz P3: 3700-3980 MHz P4: 3700-3980 MHz P5: 3700-3980 MHz P6: 3700-3980 MHz	Band RF port 1695-2690 1, 2, 3, 4, 5, 6, 7, 8 3400-3700 9, 10, 11, 12 3700-3980 13, 14, 15, 16, 17, 18, 19, 20

V7.0

10/10/24