CX20OMI218-3Pxy

  

NWAV™ Cylinder Antenna

Download this datasheet

20-port cylinder antenna 698-4200 MHz:

4 ports 698-960, 8 ports 1695-2690 MHz, and 8 ports 3400-4200 MHz
  • Small Cell antenna with Peanut pattern shape
  • Supports deployments with 4x4 MIMO capability with all bands
  • Excellent cross-polar discrimination for enhanced MIMO performance
  • Center-mounted lift ring for easy installations
  • Future-proof design to support up to 4200 MHz
  • Optimal 3400-4200 MHz gain to realize EiRP limit

  Low band Mid band 3.5 GHz
Frequency bands, MHz (2x) 698-960 (4x) 1695-2690 (4x) 3400-4200
Array R1 R2 Y1 Y2 Y3 Y4 P1 P2 P3 P4
Connector 4 PORTS 8 PORTS 8 PORTS
Polarization XPOL XPOL XPOL
Horizontal beamwidth (HBW), degrees1 180 180 180
Electrical downtilt (EDT), degrees1 0 2, 6, 10 0
Configuration Peanut omni antenna
Connector type (20x) 4.3-10 female
Dimensions, in. (mm) 24.0/ 14.6 (609.6/ 370.8)
Maximum composite power, watts (all ports) 1000
Radome color Gray (Pantone 420C) Brown (Pantone 476C)
Electrical specifications Low Band R1 R2
Frequency range, MHz (2x) 698-960
Polarization (2x) ± 45°
Gain, BASTA, dBi 3.4 ± 0.5
Gain, MAX, dBi 4.0
Horizontal beamwidth (HBW), 3 dB, degrees1 180
Vertical beamwidth (VBW), 3dB, degrees1 77.2
Electrical downtilt (EDT), degrees 0
Impedance, ohms 50
VSWR ≤ 1.5:1
PIM, 2x20W carrier, dBc < -153
Isolation, intra-band, dB >25
Isolation, inter-band, dB >28
Input power per port, watts 150
Electrical specifications Mid Band Y1 Y2 Y3 Y4
Frequency range, MHz   (4x) 1695-2690
Frequency sub-range, MHz 1695-1880 1850-1990 1920-2200 2300-2690
Polarization   (4x) ± 45°
Gain, BASTA, dBi 7.8 ± 0.5 8.2 ± 0.4 8.5 ± 0.7 9.1 ± 0.5
Gain, MAX, dBi 8.3 8.7 9.0 10.0
Horizontal beamwidth (HBW), 3 dB, degrees1 180 180 180 180
Vertical beamwidth (VBW), 3dB, degrees1 31.5 30.0 24.8 23.2
Electrical downtilt (EDT), degrees   2 or 6 or 10
Impedance, ohms   50
VSWR   ≤ 1.5:1
PIM, 2x20W carrier, dBc   < -153
Isolation, intra-band, dB   >25
Isolation, inter-band, dB   >28
Input power per port, watts   125
Electrical specification 3400-4200 MHz P1 P2 P3 P4
Frequency range, MHz (4x) 3400-4200
Polarization (4x) ± 45°
Gain, BASTA, dBi 9.2 ± 0.5
Gain, MAX, dBi 9.6
Horizontal beamwidth (HBW), 3 dB, degrees1 180
Vertical beamwidth (VBW), 3dB, degrees1 19.1 ± 2
Electrical downtilt (EDT), degrees 0
Impedance, ohms 50
VSWR ≤ 1.5:1
PIM, 2x20W carrier, dBc <-145
Isolation, intra-band, dB >25
Isolation, inter-band, dB >28
Input power per port, watts 100
1 Typical value over frequency and tilt.  
Mechanical specifications
Dimensions height/diameter, inches (mm)

24.0/ 14.6 (609.6/ 370.8)
Antenna volume (cubic feet) 2.32
No. of RF input ports, connector type, and location 20 x 4.3-10 RF, bottom
RF connector torque 96 lbf·in (10.85 N·m or 8 lbf·ft)
Net antenna weight, lb (kg) 36 (16.32)
Rated wind survival speed, mph (km/h) 150 (241)
Frontal wind loading @ 160 km/h, lbf (N) 30 (133)
Equivalent flat plate @ 100 mph and Cd=2, sq ft 1.17/0.69
Array topology

10 sets of radiating arrays

R1: 698-960 MHz
R2: 698-960 MHz

Y1: 1695-2690 MHz

Y2: 1695-2690 MHz
Y3: 1695-2690 MHz
Y4: 1695-2690 MHz

P1: 3400-4200 MHz

P2: 3400-4200 MHz

P3: 3400-4200 MHz

P4: 3400-4200 MHz
Band RF port
698-960 1-2
698-960 3-4
1695-2690 5-6
1695-2690 7-8
1695-2690 9-10
1695-2690 11-12
3400-4200 13-14
3400-4200 15-16
3400-4200 17-18
3400-4200 19-20
Front view End view
  The 0 degree reference arrow corresponds to the 0 degree position in the antenna pattern file. Each antenna pattern file uses a top down orientation view (the patterns are viewed from the top of the antenna looking down).
End view details: 6 stud bolts for direct mount to the Universal Sleeve (SC-BKT-SLA)
Notes on mounting brackets Example bracket configuration
  • The antenna comes with the bottom mount studs (marked as 1 ) factory-installed.
  • JMA cylinder brackets are compatible with bottom mount via universal cantenna mount sleeve (marked as 2 ) (SC-BKT-SLA), sold separately with JMA cylinder mounting systems.
  • To mitigate potential risk of PIM issues, the recommended torque values need to be applied.
Ordering information
Antenna model Description

CX20OMI218-3Pxy

xy= fixed electrical tilt for 1695-2690 MHz in degrees
x= arrays Y1 & Y3
y= arrays Y2 & Y4

 2ft 20 Port OMNI antenna 4LB 8MB 8CBRS
xy=2, 6, or 10 deg FET per 4 ports 1695-2690 MHz
x= FET value for ports 5, 6, 9, 10
y= FET value for ports 7, 8, 11, 12
Model Radome color   Tilt configuration Radome color and tilt configuration description
R1 R2 Y1-Y4 (x,y) P1-P4
CX20OMI218-3P22

GRAY

(G)

 0 2° 0 2ft 20 Port antenna with GRAY Radome and 2° & 2° tilt settings
CX20OMI218-3P26 0 Y1&Y3=2°,Y2&Y4=6° 0 2ft 20 Port antenna with GRAY Radome and 2° & 6° tilt settings
CX20OMI218-3P210 0 Y1&Y3=2°,Y2&Y4=10° 0 2ft 20 Port antenna with GRAY Radome and 2° & 10° tilt settings
CX20OMI218-3P66 0 6° 0 2ft 20 Port antenna with GRAY Radome and 6° & 6° tilt settings
CX20OMI218-3P610 0 Y1&Y3=6°,Y2&Y4=10° 0 2ft 20 Port antenna with GRAY Radome and 6° & 10° tilt settings
CX20OMI218-3P1010 0 10° 0 2ft 20 Port antenna with GRAY Radome and 10° & 10° tilt settings
CX20OMI218-3PW22

BROWN

(W)

 0 2° 0 2ft 20 Port antenna with BROWN Radome and 2° & 2° tilt settings
CX20OMI218-3PW26 0 Y1&Y3=2°,Y2&Y4=6° 0 2ft 20 Port antenna with BROWN Radome and 2° & 6° tilt settings
CX20OMI218-3PW210 0 Y1&Y3=2°,Y2&Y4=10° 0 2ft 20 Port antenna with BROWN Radome and 2° & 10° tilt settings
CX20OMI218-3PW66 0 6° 0 2ft 20 Port antenna with BROWN Radome and 6° & 6° tilt settings
CX20OMI218-3PW610 0 Y1&Y3=6°,Y2&Y4=10° 0 2ft 20 Port antenna with BROWN Radome and 6° & 10° tilt settings
CX20OMI218-3PW1010 0 10° 0 2ft 20 Port antenna with BROWN Radome and 10° & 10° tilt settings
Small Cell solutions and mounting systems (sold separately)
Side Arm Mounting System SC-BKT-SA-(color) Wide Diameter Pole SC-BKT-WTPE-(color)
Steel Pole Mounting System SC-BKT-SLA (color)    

V5.0

11/20/24